Snow Guards for Membrane Roofs
Need a recommendation?

Snow Guards for Membrane Roofing - ColorSnap-M®

The simple solution for anyone needing snow guards for membrane roofs, including low-slope and single-ply.

If you're already familiar with our Color Snap® product, you know it's the easiest snap together snow retention system on the market. Color Snap® was originally designed specifically for SSMR (Standing Seam Metal Roofs), but when installing in conjunction with an MCP (Membrane-Covered Plate)...it retains its history of the fastest and easiest snow retention system on the market -now available for membrane roofs.

Installs and seals confidently without extensive modifications

Existing products for low sloped roofs can require large holes to be cut through the top membrane, removal of insulation down to the substrate and installation of wood blocking. Brackets are then attached to the blocking and additional flashing must be installed, in hopes of providing a leakproof assembly. (photo at right: Vent damage from typical snow loads)  *Based on typical contractor experiences.

Some of the many benefits include:

  • No cuts, wood blocking, additional flashing or adhesives!
  • Installs in half the time!*
  • Uses ready-available technology & products
  • Color Snap® insert to match existing roofing material
  • Load tested by 3rd party 
  • Engineering layouts available from AceClamp® 
For more information, please call AceClamp® at 860-200-3787 or send us an inquiry.  Feel free to download our Color Snap®-M product sheet below.
Snow guards for membrane roofing

Above: Movement of snow loads can be highly destructive to roofing fixtures, even on low slope roofs.

    Watch the Color Snap-M video below to learn more about how this exciting new snow guard system from AceClamp.

*

Color Snap® Ice Clip

Compatibility:  Snow|Zip-Rib|Single-Lock|Double-Lock|T-Panel|Snap-Lock|Snap-Lock-Short

*

Color Snap® Snow Rail

Compatibility:  Snow|Zip-Rib|Single-Lock|Double-Lock|T-Panel|Snap-Lock|Snap-Lock-Short

*

Color Snap®-M Snow Guards for Membrane Roofing

Compatibility:  Snow|

Get a rapid quote and a free sample part!

2 bar snow guard system

Shown above: A2N rail type snow guard system on a snap seam metal roof.

* periodic ACE products and updates only.

About Us

If you’re using the same old products to mount solar, satellite, communications, ductwork – or practically anything-to metal roofs you’re wasting time and money. The AceClamp® family of roof mounting innovations give you stronger, more flexible mounting options – without damaging roof surfaces and risking roof warranties.

Contact Us
  • PMC Industries, Inc.
  • 87 Spring Ln. Plainville, CT 06062 USA
  • Phone +01 860 351 0686

  • Fax +01 860 351 0689

  • info@aceclamp.com
Popular News

Monday, March 20, 2017

AceClamp Colorsnap-M & Solar PV Kit Unveiling at NERCA March 29-30th 2017

 

Friday, September 22, 2017

Solar Mounting Tips

 
LEGAL DISCLAIMER: Products shown on this website may include 3D generated artwork that may differ from actual product. Design and specifications subject to change without notice. Unauthorized copying or use of any content included within this website is strictly prohibited. AceClamp products are not approved for use as a personal fall-restraint device. **Results may vary. Always follow proper installation and torque specifications. Be sure to check snow loads for your area before purchasing.
WARNING: DO NOT USE ACE CLAMP PRODUCTS AS A PERSONAL FALL RESTRAINT DEVICE!