Need a recommendation?

Standing Seam Solar Clamps by AceClamp®

AceClamp® precision engineered solar panel mounts for metal roofs.

Our solar panel mounting kits are available in two varieties: A rackless mounting kit and an L-Foot kit for use with racking systems. Both kits utilize identical roofing clamps to secure panels to the seams of metal roofing panels. Each of our kits utilizes our non-penetrating roofing clamps, which helps protect roofing panels from installation damages by eliminating the rotating forces exerted on panels by typical set screws.

  • AceClamp® Solar-Kit is fully assembled ready to be installed. (No bag of loose bolts, nuts or washers)
  • Patented designs allow installation at any point on the seam.
  • Easier and faster to install than the competition.
  • Can be adjusted even after accessories have been installed.
  • Stainless steel serrated top and bottom flanges capture the PV panel and “bond” the panels frame-to-frame (No separate copper ground needed) but available on the A2® AceClamp®.

Standing Seam Solar Clamps by AceClamp®

Designed for Architects. Manufactured for Contractors. Labor savings for Roofers & Installers!

Standing Seam Solar Clamps
Rackless Solar Installation Method

Need to install your panels without using a rack?  Our Rackless Solar Mounting Kit provides confident gripping power and secures panels without the need for a racking system. The kit offers a large grip area and comes pre-assembled and install ready for your panel thickness, right out of the box. AceClamp® A2® Rackless Mounting Kit components include a custom sized preset-height spacer that is sized to your panel height.

Standing Seam Solar Clamps
Seam to Rack Installation

For installers looking for an appropriate solution for mounting their racked array to a metal roof, our L-Foot kit bonds the racking system to metal roof seams utilizing our non-penetrating metal roofing clamps.  The AceClamp® L-Foot kit adjusts to accommodate almost any type of racking system, providing a secure, low-cost method of mounting a racked PV array to a metal roof.

Standing Seam Solar Clamps
Non-Penetrating Metal Roof Clamps

Many types of SSMR, including single, double and snap-lock panels can utilize our A2® line of metal roof clamps.  The AceClamp® A2® features our non-penetrating pin design and a grounding slot with a stainless steel sleeve for wire security, making it a perfect choice for most solar panel mounts for metal roofs.  A2® variants include the A2®-N, which is ideal for many nail-down metal roofs with seams of 1.5" height, and the A2®-Nw, which works with 1" snap-lock panels.

Get a rapid quote and free sample part!

Solar clamp for metal roof smmr kit

Shown above: A2 solar clamp kit for SSSM (standing seam metal roof).

Learn how to mount solar panels on a metal roof with the AceClamp®

* periodic ACE products and updates only.

About Us

If you’re using the same old products to mount solar, satellite, communications, ductwork – or practically anything-to metal roofs you’re wasting time and money. The AceClamp® family of roof mounting innovations give you stronger, more flexible mounting options – without damaging roof surfaces and risking roof warranties.

Contact Us
  • PMC Industries, Inc.
  • 87 Spring Ln. Plainville, CT 06062 USA
  • Phone +01 860 351 0686

  • Fax +01 860 351 0689

Popular News

Wednesday, June 22, 2016

Connecticut Motor Cars & Coaches


Friday, July 14, 2017

AceClamp to exhibit and showcase their Solar PV Kit product at SPI September 10th.

LEGAL DISCLAIMER: Products shown on this website may include 3D generated artwork that may differ from actual product. Design and specifications subject to change without notice. Unauthorized copying or use of any content included within this website is strictly prohibited. AceClamp products are not approved for use as a personal fall-restraint device. **Results may vary. Always follow proper installation and torque specifications. Be sure to check snow loads for your area before purchasing.