Need a recommendation?

Standing Seam Solar Clamps by AceClamp®

AceClamp® precision engineered metal roof solar mounting systems.

Our solar panel mounting kits are available in two varieties: A rackless mounting kit and an L-Foot kit for use with racking systems. Both kits utilize identical roofing clamps to secure panels to the seams of metal roofing panels. Each of our kits utilizes our non-penetrating roofing clamps, which helps protect roofing panels from installation damages by eliminating the rotating forces exerted on panels by typical set screws.

  • AceClamp® Solar-Kit is fully assembled ready to be installed. (No bag of loose bolts, nuts or washers)
  • Patented designs allow installation at any point on the seam.
  • Easier and faster to install than the competition.
  • Can be adjusted even after accessories have been installed.
  • Stainless steel serrated top and bottom flanges capture the PV panel and “bond” the panels frame-to-frame (No separate copper ground needed) but available on the A2® AceClamp®.

Standing Seam Solar Clamps by AceClamp®

Designed for Architects. Manufactured for Contractors. Labor savings for Roofers & Installers!

Standing Seam Solar Clamps for Metal Roof Solar Mounting Systems
Railless metal roof solar mounting systems

Need to install your panels without using a rack?  Our Rackless Solar Mounting Kit provides confident gripping power and secures panels without the need for a racking system. The kit offers a large grip area and comes pre-assembled and install ready for your panel thickness, right out of the box. AceClamp® A2® Rackless Mounting Kit components include a custom-sized preset-height spacer that is sized to your panel height.

Standing Seam Solar Clamps for Metal Roof Solar Mounting Systems
Solar Racking for Metal Roof Solar Mounting Systems

For installers looking for an appropriate solution for mounting their racked array to a metal roof, our L-Foot kit bonds the racking system to metal roof seams utilizing our non-penetrating metal roofing clamps.  The AceClamp® L-Foot kit adjusts to accommodate almost any type of racking system, providing a secure, low-cost method of mounting a racked PV array to a metal roof.

Standing Seam Solar Clamps
Non-Penetrating Metal Roof Solar Panel Clamps

Many types of SSMR, including single, double and snap-lock panels can utilize our A2® line of metal roof clamps.  The AceClamp® A2® features our non-penetrating pin design and a grounding slot with a stainless steel sleeve for wire security, making it a perfect choice for most solar panel mounts for metal roofs.  A2® variants include the A2®-N, which is ideal for many nail-down metal roofs with seams of 1.5" height, and the A2®-Nw, which works with 1" snap-lock panels.

Get a rapid quote and free sample part!

Solar clamp for metal roof smmr kit

Shown above: A2 solar clamp kit for SSSM (standing seam metal roof).

 
Find the best solar mounting systems for your roofing material.
We manufacture several solar mounting options for metal roofs, as well as bolt down and screw down systems for Asphalt, Tile and TPO (Membrane). AceClamp® has both rack and rackless mounting systems available.

Metal Roof Solar Mounting System snown on SSMR

METAL ROOF SOLAR MOUNTING SYSTEMS

Hurricane HVHZ rated Solar Racking Systems by AceClamp for Standing Seam Metal, SSMR, TPO, Membrane and Asphalt roofs

SOLAR RACKING SYSTEMS FOR SSMR, ISR, TPO & ASPHALT

Solar panel clamps for ssmr, standing seam metal roofs

SOLAR PANEL CLAMPS
 

* periodic ACE products and updates only.

About Us

If you’re using the same old products to mount solar, satellite, communications, ductwork – or practically anything-to metal roofs you’re wasting time and money. The AceClamp® family of roof mounting innovations give you stronger, more flexible mounting options – without damaging roof surfaces and risking roof warranties.

Contact Us
  • PMC Industries, Inc.
  • 87 Spring Ln. Plainville, CT 06062 USA
  • Phone +01 860 351 0686

  • Fax +01 860 351 0689

  • info@aceclamp.com
Popular News

Thursday, May 23, 2019

Continuing Education Course Now Available!

 

Tuesday, March 12, 2019

PV Pointer: Safety tips for rooftop solar panels in snow country

 
LEGAL DISCLAIMER: Products shown on this website may include 3D generated artwork that may differ from actual product. Design and specifications subject to change without notice. Unauthorized copying or use of any content included within this website is strictly prohibited. AceClamp products are not approved for use as a personal fall-restraint device. **Results may vary. Always follow proper installation and torque specifications. Be sure to check snow loads for your area before purchasing.
WARNING: DO NOT USE ACE CLAMP PRODUCTS AS A PERSONAL FALL RESTRAINT DEVICE!