AceClamp® Roofing Fastener System Installed at Manufacturing Plant Prompts CEO to Order One for His Own House > PMC INDUSTRIES, INC. manufacturer of AceClamp SSMR Clamps for standing seam metal roofing

AceClamp® Roofing Fastener System Installed at Manufacturing Plant Prompts CEO to Order One for His Own House

Residential standing seam metal roof (SSMR) solar installation praised by city building inspector

PLAINVILLE, Conn. (September 3, 2014) – An AceClamp® roof fastener system from AceClamp®/PMC Industries was recently used for a standing seam metal roof (SSMR) installation at the Morin Corporation’s manufacturing site in Connecticut. Morin is one of the industry’s most versatile manufacturers of single element metal wall and roof panel systems. Besides Connecticut, Morin has plants in California and Florida.

The Connecticut installation went so well that Morin CEO Ilhan Eser used the AceClamp® A2® Solar Kit fastening system to install solar panels at his own home in California. The city’s building inspector there remarked it was “the best system he had seen so far.”

The AceClamp® A2® roofing clamp recently passed UL’s 2703 requirements and is now UL Listed. The AceClamp® A2® and Solar Mounting Kit is also Evaluated to UL 467 for its integral ground-lug function.

The AceClamp® A2® Solar Mounting Kit offers the PV market one of the strongest roof clamp systems in the industry, compared with single set screw roof clamp systems. The kit comes fully assembled with round stainless steel serrated top and bottom flanges that capture the PV panel and bond the solar panels frame-to-frame, providing electrical continuity so that no additional copper ground wire is needed. The AceClamp® A2® roof clamp has a distinctive “push-pin” design that prevents torque back-out, caused by wind flutter or constant seismic vibration. The innovative fastener will not scratch roof panel surfaces or damage roof coatings, preserving manufacturers’ warranties.

For solar racking systems, AceClamp®/PMC’s new L-Foot is a lower profile, L-shaped bracket that makes installing these solar panel systems easier than ever. Solar installers no longer have to contend with wide brackets that prevent complete access to mounting roof clamp fasteners.

The new L-Foot does not impede access to the AceClamp® A2® roofing clamp side bolt, making any adjustment or re-torquing quick and easy. The bracket’s shorter foot allows complete access to the roof clamp’s built-in grounding cable channel, so the bracket doesn’t have to be removed to install the grounding wires.

About AceClamp®/PMC Industries
AceClamp®/PMC Industries Inc. is a “Made-in-the-U.S.A.” company that prides itself on its strong R&D and current manufacturing techniques to take ideas from concept to finished product. With its decades-long experience in the bearing and seal market for aerospace and automotive applications, the company has expanded into the solar and snow retention roofing industry offering time-saving, patented, installation products. Besides aerospace, automotive and metal roofing, AceClamp®/PMC serves the appliance, construction, medical device, military, and transportation industries. For more information, call 860.200.3787 or visit: www.aceclamp.com.

AceClamp® Roofing Fastener System Installed at Manufacturing Plant Prompts CEO to Order One for His Own House
Need a recommendation?
 
Find the best snow guards for your roofing material.
We manufacture both snow bar and snow rails for metal roof. We also offer bolt down and screw down systems for Membrane, Asphalt, Tile, and Slate roofing. AceClamp® systems also help stop falling ice with our ice guard attachments, which are screwed to the rail or snapped into place on our new easy-to-install Color Snap® product.

AceClamp A2 Snow Guards shown on Metal Roof

SNOW GUARDS FOR METAL ROOFING

Ace ColorSnap-m Snow Guards on low-slope membrane roof

SNOW GUARDS FOR MEMBRANE

Ace Clamp 3 Rail Snow Guards Shown on Shingle Roof

SNOW GUARDS FOR SHINGLE ROOFING

AceClamp 3 Rail Snow Guards Shown on Slate Roof

SNOW GUARDS FOR SLATE ROOFING
 

Get a rapid quote and a free sample part!

2 bar snow guard system

Shown above: A2N rail type snow guard system on a snap seam metal roof.

* periodic ACE products and updates only.

About Us

If you’re using the same old products to mount solar, satellite, communications, ductwork – or practically anything-to metal roofs you’re wasting time and money. The AceClamp® family of roof mounting innovations give you stronger, more flexible mounting options – without damaging roof surfaces and risking roof warranties.

Contact Us
  • PMC Industries, Inc.
  • 87 Spring Ln. Plainville, CT 06062 USA
  • Phone +01 860 351 0686

  • Fax +01 860 351 0689

  • info@aceclamp.com
Popular News

Thursday, May 5, 2016

AceClamp® Receives Metal Roofing Top 10 Product Award

 

Thursday, May 5, 2016

Patented snow guard design protects roofing material from damage

 
LEGAL DISCLAIMER: Products shown on this website may include 3D generated artwork that may differ from actual product. Design and specifications subject to change without notice. Unauthorized copying or use of any content included within this website is strictly prohibited. AceClamp products are not approved for use as a personal fall-restraint device. **Results may vary. Always follow proper installation and torque specifications. Be sure to check snow loads for your area before purchasing.
WARNING: DO NOT USE ACE CLAMP PRODUCTS AS A PERSONAL FALL RESTRAINT DEVICE!